Vulnerability · Published Apr 1, 2025 · Assigned by Linux

CVE-2025-21932mm: abort vma_modify() on merge out of memory failure

High 7.0

In plain English

A high-severity security flaw in Linux from Linux. There are no confirmed reports of exploitation so far. The chance it is exploited in the next 30 days is estimated at 0.2% (higher than 11% of all known vulnerabilities). Fixed versions are available - upgrade the affected package.

Severity (CVSS 3.1)7.0High
Exploit odds (30 days)0.2%top 89.3% of all CVEs
Exploited in the wildNo reportsnot in CISA KEV
Attack toolingNoneno public tooling known

Official description

In the Linux kernel, the following vulnerability has been resolved: mm: abort vma_modify() on merge out of memory failure The remainder of vma_modify() relies upon the vmg state remaining pristine after a merge attempt. Usually this is the case, however in the one edge case scenario of a merge attempt failing not due to the specified range being unmergeable, but rather due to an out of memory error arising when attempting to commit the merge, this assumption becomes untrue. This results in vmg->start, end being modified, and thus the proceeding attempts to split the VMA will be done with invalid start/end values. Thankfully, it is likely practically impossible for us to hit this in reality, as it would require a maple tree node pre-allocation failure that would likely never happen due to it being 'too small to fail', i.e. the kernel would simply keep retrying reclaim until it succeeded. However, this scenario remains theoretically possible, and what we are doing here is wrong so we must correct it. The safest option is, when this scenario occurs, to simply give up the operation. If we cannot allocate memory to merge, then we cannot allocate memory to split either (perhaps moreso!). Any scenario where this would be happening would be under very extreme (likely fatal) memory pressure, so it's best we give up early. So there is no doubt it is appropriate to simply bail out in this scenario. However, in general we must if at all possible never assume VMG state is stable after a merge attempt, since merge operations update VMG fields. As a result, additionally also make this clear by storing start, end in local variables. The issue was reported originally by syzkaller, and by Brad Spengler (via an off-list discussion), and in both instances it manifested as a triggering of the assert: VM_WARN_ON_VMG(start >= end, vmg); In vma_merge_existing_range(). It seems at least one scenario in which this is occurring is one in which the merge being attempted is due to an madvise() across multiple VMAs which looks like this: start end |<------>| |----------|------| | vma | next | |----------|------| When madvise_walk_vmas() is invoked, we first find vma in the above (determining prev to be equal to vma as we are offset into vma), and then enter the loop. We determine the end of vma that forms part of the range we are madvise()'ing by setting 'tmp' to this value: /* Here vma->vm_start <= start < (end|vma->vm_end) */ tmp = vma->vm_end; We then invoke the madvise() operation via visit(), letting prev get updated to point to vma as part of the operation: /* Here vma->vm_start <= start < tmp <= (end|vma->vm_end). */ error = visit(vma, &prev, start, tmp, arg); Where the visit() function pointer in this instance is madvise_vma_behavior(). As observed in syzkaller reports, it is ultimately madvise_update_vma() that is invoked, calling vma_modify_flags_name() and vma_modify() in turn. Then, in vma_modify(), we attempt the merge: merged = vma_merge_existing_range(vmg); if (merged) return merged; We invoke this with vmg->start, end set to start, tmp as such: start tmp |<--->| |----------|------| | vma | next | |----------|------| We find ourselves in the merge right scenario, but the one in which we cannot remove the middle (we are offset into vma). Here we have a special case where vmg->start, end get set to perhaps unintuitive values - we intended to shrink the middle VMA and expand the next. This means vmg->start, end are set to... vma->vm_start, start. Now the commit_merge() fails, and vmg->start, end are left like this. This means we return to the rest of vma_modify() with vmg->start, end (here denoted as start', end') set as: start' end' |<-->| |----------|------| | vma | next | |----------|------| So we now erroneously try to split accordingly. This is where the unfortunate ---truncated---

Affected packages & fixed versions

EcosystemPackageFixed inAdvisory
Debian:13linux6.12.19-1DEBIAN-CVE-2025-21932
Debian:14linux6.12.19-1DEBIAN-CVE-2025-21932
Ubuntu:22.04:LTSlinux-allwinner-5.19no fix listedUBUNTU-CVE-2025-21932
Ubuntu:22.04:LTSlinux-aws-5.19no fix listedUBUNTU-CVE-2025-21932
Ubuntu:22.04:LTSlinux-aws-6.2no fix listedUBUNTU-CVE-2025-21932
Ubuntu:22.04:LTSlinux-aws-6.5no fix listedUBUNTU-CVE-2025-21932
Ubuntu:22.04:LTSlinux-azure-5.19no fix listedUBUNTU-CVE-2025-21932
Ubuntu:22.04:LTSlinux-azure-6.2no fix listedUBUNTU-CVE-2025-21932
Ubuntu:22.04:LTSlinux-azure-6.5no fix listedUBUNTU-CVE-2025-21932
Ubuntu:22.04:LTSlinux-azure-fde-5.19no fix listedUBUNTU-CVE-2025-21932
Ubuntu:22.04:LTSlinux-azure-fde-6.2no fix listedUBUNTU-CVE-2025-21932
Ubuntu:22.04:LTSlinux-gcp-5.19no fix listedUBUNTU-CVE-2025-21932
Ubuntu:22.04:LTSlinux-gcp-6.2no fix listedUBUNTU-CVE-2025-21932
Ubuntu:22.04:LTSlinux-gcp-6.5no fix listedUBUNTU-CVE-2025-21932
Ubuntu:22.04:LTSlinux-hwe-5.19no fix listedUBUNTU-CVE-2025-21932
Ubuntu:22.04:LTSlinux-hwe-6.2no fix listedUBUNTU-CVE-2025-21932
Ubuntu:22.04:LTSlinux-hwe-6.5no fix listedUBUNTU-CVE-2025-21932
Ubuntu:22.04:LTSlinux-intel-iot-realtimeno fix listedUBUNTU-CVE-2025-21932
Ubuntu:22.04:LTSlinux-lowlatency-hwe-5.19no fix listedUBUNTU-CVE-2025-21932
Ubuntu:22.04:LTSlinux-lowlatency-hwe-6.2no fix listedUBUNTU-CVE-2025-21932
Ubuntu:22.04:LTSlinux-lowlatency-hwe-6.5no fix listedUBUNTU-CVE-2025-21932
Ubuntu:22.04:LTSlinux-nvidia-6.2no fix listedUBUNTU-CVE-2025-21932
Ubuntu:22.04:LTSlinux-nvidia-6.5no fix listedUBUNTU-CVE-2025-21932
Ubuntu:22.04:LTSlinux-oem-5.17no fix listedUBUNTU-CVE-2025-21932
Ubuntu:22.04:LTSlinux-oem-6.0no fix listedUBUNTU-CVE-2025-21932
Ubuntu:22.04:LTSlinux-oem-6.1no fix listedUBUNTU-CVE-2025-21932
Ubuntu:22.04:LTSlinux-oem-6.5no fix listedUBUNTU-CVE-2025-21932
Ubuntu:22.04:LTSlinux-oracle-6.5no fix listedUBUNTU-CVE-2025-21932
Ubuntu:24.04:LTSlinux-raspi-realtimeno fix listedUBUNTU-CVE-2025-21932
Ubuntu:22.04:LTSlinux-realtimeno fix listedUBUNTU-CVE-2025-21932
Ubuntu:24.04:LTSlinux-realtimeno fix listedUBUNTU-CVE-2025-21932
Ubuntu:22.04:LTSlinux-riscvno fix listedUBUNTU-CVE-2025-21932
Ubuntu:22.04:LTSlinux-riscv-5.19no fix listedUBUNTU-CVE-2025-21932
Ubuntu:22.04:LTSlinux-riscv-6.5no fix listedUBUNTU-CVE-2025-21932
Ubuntu:22.04:LTSlinux-starfive-5.19no fix listedUBUNTU-CVE-2025-21932
Ubuntu:22.04:LTSlinux-starfive-6.2no fix listedUBUNTU-CVE-2025-21932
Ubuntu:22.04:LTSlinux-starfive-6.5no fix listedUBUNTU-CVE-2025-21932

Affected products (as reported)

VendorProductVersions
Linux Linux 2f1c6611b0a89afcb8641471af5f223c9caa01e0 – before 79636d2981b066acd945117387a9533f56411f6f2f1c6611b0a89afcb8641471af5f223c9caa01e0 – before 53fd215f7886a1e8dea5a9ca1391dbb697fff6012f1c6611b0a89afcb8641471af5f223c9caa01e0 – before 47b16d0462a460000b8f05dfb1292377ac48f3ca
Linux Linux 6.12

References